Now it's time to finish up the rough edges. We need trim!
I had found a gentleman on Facebook Marketplace who was selling a huge bundle of trim, already painted white for $20. There was window trim, door trim, and baseboard trim. Enough to complete almost the entire room. We loaded it up on the trailer. All it needed was a fresh coat of white paint and it would be ready to go.
It's now too cold to paint outside. We had to spread out tarps under the saw horses in the garage to paint the trim. Since the big garage is pretty new, we didn't want any paint splatters on the cement. This is going to be "Steve's Garage" soon, so I better be clean and neat out there as his guest when working on projects. LOL .
Steve began to measure, cut, and air nail up the pieces of trim. He had to go around every window and every doorway. This would neatly finish up the inside areas where the window sets, as well as the surface trim that's flat on the wall against the plaster. In the pics below you can see he also went around the doorway that leads into the kitchen.
In taking a hint from a This Old House program on PBS, he decided to frame the trim around each of the three front windows in a method different than normal.
After careful measuring, he built three box units for each window and attached the trim as well. He pre-built them all out in the garage. Making perfect cuts and perfect 90 degree angles, he was able to assemble them without any gaps or mis-cuts. Each window trim now was a complete box unit to be brought in and set into place.
It worked very well to level them all off and shim them into place over the irregular jagged openings of the plastered walls. The windows of course are all level, even and plumb. The newly created box trims are all level, even and plumb. By sandwiching them together this way, the irregular plaster edges are enclosed and completely hidden.
I put my lace curtains into place right away. They are on three little spring tension rods that just fit into the window frames. Do you see that they're cute little chickens and roosters? Appropriate for a farmhouse, don't you think?
He was only able to do the trim around one set of the french windows facing out to the east. The other set we will not trim out until the ceramic tile flooring is laid in front of those. To me, adding the trim is like adding a picture frame to this beautiful view, like art work.
Here's the second project that we worked on.
Reuse Repurpose Recycle
In these original photos from 2015, it showed two pieces of black mantle wood: a lower one that spanned the entire width of the fireplace and higher one that was shorter.
(oh my look at the poor beat up livingroom and diningroom back then)
this is now:
Evidently, somewhere along the line, somebody took down the upper mantle and set it in the garage. That is where we found it now in 2019.
Of course, you know me, I am all in to Reuse Repurpose Recycle. I took a look at that mantle, and got out my measuring tape. I had an idea! My brain got to thinking... aha! I had that mantle laying in the garage.
There is a little corner area of the she shed that we are going to build into a triangular closet later on. I wanted some type of a board or shelf there to mount some coat hooks. We needed a handy spot to hang coats up near the door.
I marked with a pencil where I needed the mantle cut, and Steve helped me add a little chunk of wood to fill in one empty gap. Now it could be mounted in an L-shape for a coat rack in the corner of the she shed!
As it shows in that other picture, the mantle was black. It took three coats of paint to cover it up.
Once the pieces were dry, it happened to be the same day we had the littlest grandchild Claire over to visit. She just turned three years old.
We got out the set of little plastic Grandchildren Tools. We have had this very same set since Jameson was a tiny tot. He is now 11. These are the tools to help Grandpa "fix things". These tools have been played with all the way down the line, from grandchild to grandchild, now the 7th grandchild. It doesn't matter if they are boys or girls, they all need to learn to help Grandpa "fix things".
She helped me measure and mark where
each of the coat hooks needed to go.
She helped open up each little package of coat hooks and take out the screws.
She held the screws and handed them to me one at a time while patiently watching me pre-drill the pilot holes and screw them in.
She counted as we attached every hook and every screw. Miraculously, we did not lose a single piece and had nothing left over. It was a good lesson in counting, measuring and learning to keep all of the pieces in order when working on a project.
Now every time little Claire comes over, she points up to the coat rack and says: "I made that! I made that! I help."
Even after we make this area into a triangular coat closet, we will keep the rack in place within the closet. Rather than messing with hangers and a hanging rod, I would rather just reach in and hang our most often use coats, right on a hook.
For the cost of $1.99 times 6 hooks, we have a pretty darn cute little coat rack---
---made with the help of a pretty darn cute little grandchild!